00.Cover.book Page 103 Monday, January 21, 2002 5:47 PM
The Beam Receive screen appears.
Beam receive mode
Manual radio button When checked, the unit receives data in manual mode.
Automatic radio
button
Manual beam receive
Start/Stop button
Selecting the receiving mode
1.
In the Settings folder of the Home screen, tap the "Beam Receive" application
icon.
The Beam Receive screen appears.
2.
Tap the desired receiving mode (Manual, Automatic).
3.
Tap
to save the setting.
The setting will be effective immediately.
In this mode, the Beam reception mode screen appears
as the unit receives data. The unit enters receiving
standby mode when you tap the "Start" button.
When checked, the unit receives data in automatic mode.
The unit starts receiving data any time the other unit
sends data and the receiving unit detects a signal.
Tap to start/stop the IR communication for manual beam
receive.
Settings 103
Beam receive mode
Manual radio button
(recommended)
Automatic radio button
Manual beam receive
Start/Stop button