Sharp Zaurus SL-5500 Operation Manual page 134

00.Cover.book Page 129 Monday, January 21, 2002 5:47 PM
"Properties" button
Sync folder
USB IP Address
Serial IP Address
Apply button
Note: For information on how to configure the USB or serial connection, see
the separate on-line manuals, "Qtopia Desktop" or "Intellisync for SL".
Keep the default setting for normal use.
Creating a new setting
1.
Tap "Add..." in the Services folder.
The Add Network Service screen will be displayed.
Network Service list
Add button
Setting up PPP preferences
By setting up the PPP preferences, you can connect to a telephone line to access
the Internet.
Note: Specifying the IP address is not supported.
1.
On the Add Network Service screen, tap "Dial-up - PPP" or "IrDA - PPP" in the
Network Service list and then tap "Add".
Displays the properties of the network service selected in the
list. On the screen that appears, you can edit settings.
Enter the IP address to be used for USB connection.
Enter the IP address to be used for serial cable connection.
Tap to save the setting above.
Internet Settings 129
Cancel button