Table of Contents
Advertisement
Quick Links
Important DSX Cordless Lite II Telephone Installation Information
DSX Cordless Lite II Telephone Installation Tips
•
Only connect the cordless base unit to a DSX-80/160 16ESIU PCB port or a DSX-40 digital
station port. Do not plug the base into an analog port or a DS-2000 16DSTU PCB.
•
For best results, the base unit should be placed in line-of-site with its handset.
•
Cordless telephone range and reception can vary from site to site. Some of the things that
may adversely affect range and reception are:
-
Placing the base against or close to a wall (particularly if the wall has metal studs).
-
Positioning the base close to a device that emits Electromagnetic Interference (EMI),
such as a TV, radio, computer, fluorescent light, fax machine, or printer.
-
Installing the base close to other 900 Mhz devices, such as Symbol or Telex hand-held
inventory devices.
-
Installing the base above a ceiling that uses foil-backed insulation.
-
Installing the base behind a door which can be closed, tinted windows, or one-way glass
which will separate the base from the handset.
•
Always raise the base unit antenna to its full vertical position.
•
When installing more than one cordless telephone in the same site:
-
Be sure the base units are at least 15 feet apart.
-
Do not install more than 12 cordless telephones in an area of close proximity.
-
After installation, change each telephone's channel by pressing CH on the handset. This will
minimize interference between your cordless telephones. There are 30 available channels.
•
The handset must charge 5-8 hours in its charger prior to initial use.
•
The Nickel Metal Hydride Rechargeable Battery Pack is recyclable. If you replace a battery
pack, always dispose of the old pack along with your other recyclable materials.
Empowered by Innovation
– Please Read –
Important
DSX Cordless Lite II
Telephone User Guide
P/N 1093092
Rev 2, June 2006
Printed in U.S.A
1
2
.
01.00.00
Advertisement
Table of Contents
Related Manuals for NEC DSX CORDLESS LITE II
Summary of Contents for NEC DSX CORDLESS LITE II
- Page 1 Empowered by Innovation – Please Read – Important DSX Cordless Lite II Telephone Installation Information DSX Cordless Lite II Telephone Installation Tips Important • Only connect the cordless base unit to a DSX-80/160 16ESIU PCB port or a DSX-40 digital station port.
- Page 2 This manual has been developed by NEC Unified Solutions, Inc. It is intended for the use of its customers and service personnel, and should be read in its entirety before attempting to install or program the system. Any comments or suggestions for improving this manual would be appreciated.
-
Page 3: Table Of Contents
Group Ring ............. . . 28 Table of Contents ◆ i DSX Cordless Lite II Telephone User Guide... - Page 4 DSX Cordless Lite II Telephone Feature Summary ....... . 37...
-
Page 5: Chapter 1: Installation
DSX Cordless Lite II 900 Mhz Cordless Telephone Overview The DSX Cordless Lite II Telephone (P/N 730087) is a 900 Mhz digital narrow band FM cordless telephone that provides mobility, flexibility and convenience for those who spend much of the workday away from their desk. Fully integrated with the DSX sys- tem, the DSX Cordless Lite II Telephone offers many standard features such as Call For- warding, Call Coverage, Hotline, and Voice Mail. -
Page 6: The Basics
❥ Press TALK or place the handset in the charger. Changing Channels If the installation site has more than one DSX Cordless Lite II Telephone, set up each telephone to operate on its own channel. ❥ While on a call, press CH . -
Page 7: The Basics
Picks up your voice means your handset is setting up a Can optionally be connection programmed for with the base other features Figure 1: Using Your Cordless Telephone Chapter 1: Installation ◆ 3 DSX Cordless Lite II Telephone User Guide... -
Page 8: Installation
• Be sure the base units are at least 15 feet apart. 5. After installation, change each telephone’s channel by pressing CH on the handset. This will minimize interference between your cordless telephones. 4 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide... - Page 9 Installing the Base 16ESIU DSX Digital Keyset Jack WHT-BLU BLU-WHT Station Block AC Adaptor Line Line in (Optional) Line out to DSX Keyset Figure 2: Installing the Base Chapter 1: Installation ◆ 5 DSX Cordless Lite II Telephone User Guide...
- Page 10 EMI Too close to other 900 Mhz devices Behind a door that can be closed, tinted windows or one way glass Figure 4: Incorrect Installation Methods 6 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide...
-
Page 11: Mounting The Base On The Wall
- If you did not tighten the fasteners, you can slide the base off the wall before going to the next step. 1. Unplug the line cord and AC adaptor cord from the base. 2. Press the mounting tabs to release the wall-mount bracket from the base. Chapter 1: Installation ◆ 7 DSX Cordless Lite II Telephone User Guide... -
Page 12: Mounting The Base To A Wall Plate
2. Unplug the short line cord from the wall plate. 3. Unplug the short line cord and AC adaptor cord from the base. 4. Press the mounting tabs to release the wall-mount bracket from the base. 8 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide... -
Page 13: Installing The Battery In Your Handset
4. Slide the battery cover back onto the handset until it snaps into place. White wire After inserting jack, turn battery to fit into battery compartment wire Black wire Figure 7: Installing the Handset Battery Chapter 1: Installation ◆ 9 DSX Cordless Lite II Telephone User Guide... -
Page 14: Installing The Charger And Charging The Handset
To clean the battery charger contacts (Figure 9: Cleaning the Battery Charger Contacts): 1. Use a pencil eraser or soft cloth to periodically (once a month) clean the battery contacts. Figure 9: Cleaning the Battery Charger Contacts 10 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide... -
Page 15: Wall-Mounting The Charger
5. Run the AC adaptor cord through the strain relief on the back of the charger, then plug the cord into the charger. 6. Snap the charger onto the wall-mount bracket. 7. Plug the AC adaptor into the AC outlet. 1-3/16" Wall Wall Figure 10: Wall-Mounting the Charger Chapter 1: Installation ◆ 11 DSX Cordless Lite II Telephone User Guide... -
Page 16: Installing The Belt Clip
To remove the belt clip (Figure 12: Removing the Belt Clip): 1. Gently pry the belt clip prongs out of the slots in the handset. Pry prongs up from slots Figure 12: Removing the Belt Clip 12 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide... -
Page 17: Installing Headset P/N 750642 (Mx150 Earloop Style)
To install the ear cushion (Figure 14: Installing the Ear Cushion): 1. Pull the ear cushion over the earpiece. Ear cushion Pull over earpiece Figure 14: Installing the Ear Cushion Chapter 1: Installation ◆ 13 DSX Cordless Lite II Telephone User Guide... -
Page 18: Connecting The Headset And Using The Controls
1. Plug the headset into the Headset Jack on the top of the handset. 2. Clip the Belt/Lapel Clip to your belt or lapel to secure the headset cord. Belt/lapel clip Figure 15: Connecting the Headset 14 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide... -
Page 19: Installing Headset P/N 750637 (M175 Headband Style)
Figure 16: Headset P/N 750637 (M175 Headband Style) Optional Earloop Installation To install the optional earloop: 1. Snap the head band out of the ear piece. Figure 17: Installing the Optional Earloop Chapter 1: Installation ◆ 15 DSX Cordless Lite II Telephone User Guide... - Page 20 4. Insert the earloop into the earloop ring. (Installation for the right ear is shown. For the left ear, insert the earloop from underneath the earloop ring.) Figure 20: Inserting the Earloop into the Earloop Ring 16 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide...
-
Page 21: Connecting The Headset And Using The Controls
Microphone mute Microphone Microphone muted Microphone volume Headset receive vloume Less More volume Minimum Maximum volume volume volume Belt/lapel clip Figure 21: Connecting the Headset and Using the Controls Chapter 1: Installation ◆ 17 DSX Cordless Lite II Telephone User Guide... - Page 22 ......Approximately 2.3 oz. Weight 18 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide...
-
Page 23: Parts And Accessories
....3 ring tones (two volume levels each) and vibrate Distinctive Ringing The DSX Cordless Lite II Telephone is hearing-aid compatible. Parts and Accessories DSX Cordless Lite II Telephone Parts and Accessories... - Page 24 Installation Specifications and Parts 20 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide...
-
Page 25: Chapter 2: Features
To answer a call ringing or flashing a Call Coverage key: 1. Press the flashing Call Coverage key. To use your Call Coverage key to place a call to your idle co-worker: 1. Press the Call Coverage key. Chapter 2: Features ◆ 21 DSX Cordless Lite II Telephone User Guide... -
Page 26: Call Forwarding
5. Dial 2 to forward all calls; 8 to forward just outside calls. The first line of the handset display shows that Call Forwarding is enabled ( FWD ) and the destination num- ber or name. 22 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... -
Page 27: Call Waiting / Camp On
Central Office Calls, Answering is enabled by default. To answer an outside call ringing your phone: 1. Press TALK - Your handset will not vibrate while it is in its charger base. Chapter 2: Features ◆ 23 DSX Cordless Lite II Telephone User Guide... -
Page 28: Central Office Calls, Placing
3. Dial your co-worker’s extension number. - To pick up a call ringing an attendant, dial the attendant’s extension number (e.g., 300). Do not dial 0 or 01-04. 24 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... -
Page 29: Distinctive Ringing
2. Dial , then, 3. Do one of the following: - Dial to return your extension to your group. - Dial to remove your extension from your group. Chapter 2: Features ◆ 25 DSX Cordless Lite II Telephone User Guide... -
Page 30: Feature Keys
Group (1-8) Page Zone Key 13 + Page Off: Page Zone idle. Press to Page into the assigned Zone (1-7, 0 On: Page Zone busy. zone. for all call) 26 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... - Page 31 Forwarding programming mode. (the same as pressing TALK Slow Flash: Call Forwarding and dialing *3). enabled. • While busy, switches Call Forwarding on and off. Headset Key Not available. Chapter 2: Features ◆ 27 DSX Cordless Lite II Telephone User Guide...
-
Page 32: Forced Line Disconnect
- The line key flashes with a distinctive “wink-on” flash rate to show when it is on Hold or recalling. 2. Press TALK to hang up. To pick up an outside call on Hold: 1. Press the flashing line key. 28 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... -
Page 33: Hotline
To answer an Intercom call ringing your phone: 1. Press TALK Last Number Redial Last Number Redial is enabled by default. To redial your last call: 1. Press a line key + REDIAL Chapter 2: Features ◆ 29 DSX Cordless Lite II Telephone User Guide... -
Page 34: Line Queuing And Callback
- The extension you call can be unanswered, busy, or in Do Not Disturb. To answer a Message Waiting: - Your “New Mail” icon indicates that you have a Message Waiting. 1. Press TALK + Dial *8 . 30 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... -
Page 35: Microphone Mute
To make an Internal Paging Announcement: 1. Press TALK 2. Dial 3. Dial the Page Zone number (1-7 or 0 for All Call). 4. Make announcement and hang up. Chapter 2: Features ◆ 31 DSX Cordless Lite II Telephone User Guide... -
Page 36: Park
1. Place or answer an outside call on a line key. 2. Press the line key. 3. Press the line key again to allow a co-worker to join in. 32 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... -
Page 37: Removing Lines And Extensions
+ Dial + Dial the bin number (e.g., 201). To dial a Personal Speed Dial number: 1. Press TALK + Dial + Dial the bin number (e.g., 701). Chapter 2: Features ◆ 33 DSX Cordless Lite II Telephone User Guide... -
Page 38: Split
- Use this procedure to rejoin a Conference already in progress. 1. Press line key for busy line (or use Direct Line Access) + 4 to Barge In. 34 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... -
Page 39: Voice Mail
= Call Forwarding Immediate = Call Forwarding No Answer 3. Dial the voice mail master number (e.g., 700). 4. Dial to forward all calls; to forward just outside calls. Chapter 2: Features ◆ 35 DSX Cordless Lite II Telephone User Guide... -
Page 40: Voice Over
- This adjusts the handset receiver volume, not the volume of your transmitted voice. - There are four volume levels: Low, Medium, High, and Maximum. - When you hang up, your handset retains the volume level you selected. 36 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide... -
Page 41: Feature Summary
Feature Summary Feature Summary DSX Cordless Lite II Telephone Feature Summary (Page 1 of 3) DSX Cordless Lite II Telephone Feature Summary Feature Available Default Comment Alphanumeric Display Enabled Handset feature Auto Redial Background Music Barge In Disabled Call Coverage Keys... - Page 42 Feature Summary (Page 2 of 3) DSX Cordless Lite II Telephone Feature Summary Feature Available Default Comment Hold, Exclusive Enabled Hold, Intercom Hold, System Enabled Hotline Disabled Interactive Soft Keys Last Number Redial Enabled Handset feature. Enhanced Last Number Redial not available.
- Page 43 Feature Summary DSX Cordless Lite II Telephone Feature Summary (Page 3 of 3) Feature Available Default Comment Voice Over Disabled Handset cannot receive a Voice Over. Volume and Contrast Control Enabled Volume control is a handset feature. Contrast Con- trol is not available.
- Page 44 Feature Summary 40 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide...
- Page 46 NEC Unified Solutions, Inc. 4 Forest Parkway, Shelton, CT 06484 TEL: 203-926-5400 FAX: 203-929-0535 www.necunifiedsolutions.com (1093092) June 9, 2006, Rev 2 Printed in U.S.A.