NEC MOBILE TERMINAL EX User Manual page 8

CAUTION
Do not operate the product with wet hands.
Failure to follow it may cause the product to be defected.
Do not put objects on the touch panel for a long time.
Failure to follow it may cause the touch panel to be defected.
Always press a key on the touch panel or the keyboard with a finger for
typing.
Pressing a key with a hard and sharp object such as a ballpoint pen may cause the
touch panel or keyboard to be defected.
If liquid is leaked from the BATTERY PACK, wipe out the liquid adhering to the
battery mounting part of the product. Then insert a new BATTERY PACK.
Failure to follow it may cause device fault, electric shock or fire to occur.
If liquid leaked from the BATTERY PACK adheres to your skin or clothes,
wash away the liquid with clean water such as running water immediately.
The liquid may cause your skin to be irritated.
When the product is not used for a long period, remove the BATTERY PACK
for safety.
Be careful not to nip your fingers when the BATTERY PACK is placed or
removed.
Do not replace any battery if the power is on (or the power lamp is on).
Failure to follow it may cause the product to be defected or data saved in the product
to be broken.
Do not use the BATTERY PACK if rust, foreign odor, heat generation or other
trouble occurs from the BATTERY PACK. Contact your nearest maintenance
representation office.
Clean connection terminals about once per month. For the cleaning, wipe
them with cloth impregnated with a bit of OA cleaner after the power is turned
off.
Dirt and/or dust may cause the device to be defected.
Do not install Single Docking Station EX in an area where vibrations and/or
shocks are generated.
Failure to follow it may cause Single Docking Station EX to be defected.
Do not place or save Single Docking Station EX on an unstable surface (such
as a shelf)
Failure to follow it may cause Single Docking Station EX to be dropped
unintentionally, which would damage it and/or injure people.
Insert the power plug into an outlet securely.
If there is some gap between the plug and the outlet, the gap may get dusty. This
would then cause fire to occur.
Make the power cable loose to prevent the plugs and cables from being given
excess forces.
Neither pull the power and connection cables nor add excess forces to them
when Single Docking Station EX is moved to another place to be installed.
Failure to follow it may cause connected devices to operate improperly and/or some
data or programs to be broken.
Do not bend, twist or pull the power and connection cables.
Failure to follow it may cause the cables to be uncovered or disconnected, which
would bring electric shock or fire. Hold the plug of a power cable when you insert or
remove the plug from the outlet.
- 7 -