Use The On-Screen Display; The Status Display - NEC C Manual

Use the On-Screen Display

To use the OSD, you need to know how to do the following
procedures:
T
T
T
T
T
T
T

The status display

From the control panel, press the
OSD status display.
The OSD status display has an inactivity time-out. The display clears
from the screen if no control panel buttons are pressed in the time-out
period.
If the OSD status display is off-center on your screen, press
the – button to adjust the horizontal position or the + button to adjust
the vertical position of the menu.
bring-up the OSD status display
bring up the OSD control menu
move through the control menu
adjust monitor settings
save new settings
reset the OSD control menu to the factory set settings
exit the OSD control menu and the On-Screen Display
program.
MENU button once to bring up the
Adjusting the monitor 17