Call Park - System; Station Busy/No Answer Options; Automatic Callback; Tone Override - NEC XEN IPK DIGITAL TELEPHONE Manual

Call Park - System

Set
With a call in progress:
Press Transfer
Dial Call Park Set code 4
Dial Call Park location 0-9
Replace handset
Note: If the dialled Call Park location is busy, dial another Call Park location (0-9).

Station Busy/No Answer Options

Automatic Callback

Set
When calling a busy digital
telephone:
Dial Automatic Callback code 0
Replace handset
Callback Request
Set
When calling a busy or
unanswered digital telephone:
Dial Callback Request code #
Replace Handset
Note: Callback messages are automatically cancelled once the originating station is
called. Callback Request access code # must be assigned in system programming.

Tone Override

Set
When calling a busy digital telephone:
Dial Tone Override code
to send tone
Wait for signalled party to answer
†If handsfree, a visual indication only (
Note: An Override Tone will be sent each time
8
Retrieve
From any station:
*
Answer
When both telephones are idle
originating telephone rings:
Answer
Receive display and/or Feature
LED message indication:
Answer
With a call in progress:
*
* ) will be provided on the telephone's display.
*
Lift handset
Dial Call Park Retrieval code 4#
Dial Call Park Location 0-9
Converse
Lift handset
Call is placed automatically
Lift handset
Dial #; request originator is
automatically called
Repeat above procedure to
respond to additional messages
Receive tone override signal †
Press Hold
Converse with second party
is pressed.