Removing And Installing Devices While The Computer Is Running - Dell Inspiron 600m Owner's Manual

2 Pull the device by the latch release to remove the device from the module bay.
3 Insert the new device into the bay, push the device until you feel a click, and push the device
latch release in so that it is flush with the computer.
Removing and Installing Devices While the
Computer Is Running
CAUTION:
Product Information Guide.
NOTE:
If the device screw is not installed, you can remove and install devices while the computer is
running and connected to a docking device (docked).
1 Double-click the Safely Remove Hardware icon on the taskbar.
2 Click Stop and wait for the operating system to confirm that the device has stopped.
3 Click the device you want to eject.
NOTICE:
the computer. Avoid pressing down on them or placing heavy objects on top of them.
4 Press the device latch release so that the latch release pops out.
38
Using Batteries and Module Bay Devices
Before you begin any of the procedures in this section, read the safety instructions in your
To prevent damage to devices, place them in a safe, dry place when they are not installed in