Mouse Problems - Dell XPS 210 Owner's Manual

I F Y O U E X P E R I E N C E O T H E R M E M O R Y P R O B L E M S
• Reseat the memory modules (see "Memory" on page 66) to ensure that your computer is successfully
communicating with the memory.
• Ensure that you are following the memory installation guidelines (see "Installing Memory" on page 68).
• Ensure that the memory you are using is supported by your computer. For more information about the
type of memory supported by your computer, see "Memory" on page 66.
• Run the Dell Diagnostics (see "Dell Diagnostics" on page 52).

Mouse Problems

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
C L E A N T H E M O U S E — See "Mouse" on page 110.
C H E C K T H E M O U S E C A B L E
• Ensure that the cable is not damaged or frayed and check cable connectors for bent or broken pins.
Straighten any bent pins.
• Remove any mouse extension cables, and connect the mouse directly to the computer.
• Verify that the mouse cable is connected as shown on the setup diagram for your computer.
E S T A R T T H E C O M P U T E R
R
1
Simultaneously press <Ctrl><Esc> to display the Start menu.
2 press the up- and down-arrow keys
Press <u>,
<Enter>.
3
After the computer turns off, reconnect the mouse cable as shown on the setup diagram.
4
Turn on the computer.
E S T T H E M O U S E — Connect a properly working mouse to the computer, then try using the mouse.
T
C H E C K T H E M O U S E S E T T I N G S
1
Click Start, click Control Panel, and then click Printers and Other Hardware.
2
Click Mouse.
3
Adjust the settings, as needed.
R E I N S T A L L T H E M O U S E D R I V E R
42
Solving Problems
—
—
—
—
— See "Reinstalling Drivers" on page 55.
to highlight Shut down or Turn Off, and then press