Dell XPS 210 Owner's Manual page 88

4 Connect the interface cable to the back of the Media Card Reader and to the Media Card Reader
connector on the system board.
5 Replace the CD/DVD drive (see "Installing a CD/DVD Drive" on page 83).
6 Replace the hard drive (see "Installing a Hard Drive" on page 78).
7 Replace the computer cover (see "Replacing the Computer Cover" on page 96).
NOTICE:
To connect a network cable, first plug the cable in to the network device and then plug it in to the
computer.
8 Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
9 Enter system setup (see "System Setup" on page 101) and select the appropriate Drive option.
10 Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 52).
88
Removing and Installing Parts
1 interface cable
1