Dell 1642018871 Getting Started Manual page 17

Installing the UPS Front Cover
12
Install the UPS front cover.
Connecting the Equipment
13
If you plan to use Dell UPS Management Software, connect your computer to the USB port using
the supplied cable.
14
If your rack has conductors for grounding or bonding of ungrounded metal parts, connect the
ground cable (not supplied) to the ground bonding screw.
15
If an emergency power-off (disconnect) switch is required by local codes, see "Installing Remote
Emergency Power-off" (REPO) in the Dell Online Rack UPS 5600W User's Guide.
16
Plug the equipment to be protected into the UPS output receptacles, but do not turn on the
protected equipment.
NOTE:
Verify that the total equipment ratings do not exceed the UPS capacity to prevent an overload alarm.
Installation and Startup
|
15