Completing The Startup - Dell 1642018871 Getting Started Manual

Completing the Startup

1
Verify that the Normal icon
UPS is operating normally and any loads are powered.
2
On the UPS status summary screen, press the
Resolve any active alarms before continuing. See "Troubleshooting" in the Dell Network
Management Card User's Guide.
If there are no active alarms, a "No Active Alarms" message appears.
3
To change other factory-set defaults, see "Operation" in the Dell Network Management Card User's
Guide.
|
20
Installation and Startup
appears on the UPS status summary screen, indicating that the
button to check for active alarms or notices.