Listening To The Other External Components; Function Settings - Kenwood KDC-X396 Instruction Manual

Listening to the other external
components
Preparation : Make sure [ON] is selected for [BUILT-IN AUX] / [BUILTIN AUX]. (page 8)
1 Press SRC to select "AUX."
2 Turn on the external component and
start playing.
3 Turn the volume knob to adjust the
volume.

Function settings

1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CONTROL] / [AUDIO CTRL] or [SETTINGS], then
press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See the following table for selection.
Repeat step 3 until the desired item is selected/activated.
Press to return to the previous item.
4 Hold to finish the procedure.
[AUDIO CONTROL] / [AUDIO CTRL] : While listening to any source except in STANDBY state...
Item
SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level.
BASS LEVEL –8 — +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before
making an adjustment, select the source you want to adjust.)
MID LEVEL
TRE LEVEL
14
Portable audio device
(commercially available)
Selectable setting (Preset: *)
Auxiliary input jack
3.5 mm (1/8") stereo mini plug
(commercially available)