Setting The Rear Output And Subwoofer Controller; Switching The Sound Muting/Attenuation; Switching The Automatic Disc Playback; Switching The Dimmer Setting For Sub-Display - Pioneer AVIC N1 - Navigation System With DVD player Operation Manual

Setting the rear output and sub-
woofer controller
This unit's rear output (rear speaker leads output
and RCA rear output) can be used for full-range
speaker (REAR SP FULL) or subwoofer (REAR
SP SUB. W) connection. If you switch the rear
output setting to the REAR SP SUB. W, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, navigation unit is set for rear full-range
speaker connection (REAR SP FULL). When
rear output is connected to full range speakers
(when REAR SP FULL is selected), you can con-
nect the RCA subwoofer output to a subwoofer.
In this case, you can select whether to use the
subwoofer controller's (low pass filter, phase)
built-in PREOUT SUB. W or the auxiliary
PREOUT FULL.
1
Touch "REAR SP" in the INITIAL menu.
2
Touch "REAR SP" to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select FULL.
When a subwoofer is connected to the rear
output, select SUB. W.
❒ When the rear output setting is SUB. W,
you cannot change the subwoofer control-
ler.
3
Touch "PREOUT" to switch the sub-
woofer output or non fading output.
❒ Even if you change this setting, there is no
output unless you turn "NON FADING" or
"SUB WOOFER" in the AUDIO menu
"ON".
➲ Using non fading output ➞ Page 83
➲ Using subwoofer output ➞ Page 83
❒ If you change the subwoofer controller
(REAR SP), the subwoofer output (SUB
WOOFER) and non fading output (NON
FADING) in the AUDIO menu return to
the factory settings.
❒ Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a cellu-
lar telephone connected to navigation unit.
• When the voice guidance is output.
1
Touch "TEL/GUIDE" in the INITIAL
menu.
Each touch of the "TEL/GUIDE" changes the
settings as follows:
• MUTE— Muting
• ATT — Attenuation
• NORMAL — Volume does not change
❒ The sound is turned off, no audio adjust-
ment is possible.
❒ When a phone connection is made,
MUTE or ATT is indicated.
❒ Operation returns to normal when the
phone connection or the voice guidance is
ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use the Hardware
Volume to control the navigation voice
guidance volume.
Switching the automatic disc
playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading slot.
When this function is on, the disc will be auto-
matically played after it is inserted into the disc
loading slot.
Initially, this function is set to OFF.
1
Touch "DISC AUTO" in the INITIAL
menu.
Touching "DISC AUTO" switches between
"ON" and "OFF".
Switching the dimmer setting
for sub-display
To prevent the sub-display from being too bright
at night, the sub-display is automatically dimmed
when the vehicle's headlights are turned on. You
can turn dimmer on or off.
87