Other Functions; Setup Adjustments; Setting The Video Input; Setting For Rear View Camera - Pioneer AVIC N1 - Navigation System With DVD player Operation Manual

Other Functions

Setup adjustments

(1)
(1) Setup menu display
Shows the setup function names.
➲ How to display the SETUP menu ➞ Page 59

Setting the video input

You can switch the setting according to the con-
nected component.
• Select "VIDEO" to watch video of a connected
component as AV source.
• Select "M-DVD" to watch video of a connected
DVD player as S-DVD source.
1
Touch "AV INPUT" in the SETUP menu.
Each touch of the "AV INPUT" changes the
settings as follows:
• OFF — No video component is connected
• VIDEO — External video component
• M-DVD — DVD player connected with
RCA cable
When a DVD player is connected with an AV-
BUS cable, do not select "M-DVD" or else no
picture is displayed even if you select S-DVD.

Setting for rear view camera

The navigation unit features a function that auto-
matically switches to the rear camera image
(REAR VIEW CAMERA IN jack) when a rear cam-
era is installed on your vehicle. When the shift
lever is in REVERSE (R) position, the screen auto-
matically switches to a rear view camera. (For
more details, consult with your dealer.) You can
also use the camera as a rear view camera (Rear
View). In this case, you can see the image of the
rear view camera during normal driving. (The
navigation map screen can be displayed on the
right-hand side and the camera image can be
displayed on the left.) Please beware that in this
setting, camera image is not resized to fit, but
that a portion of what is seen by the camera is
not viewable.
• Pioneer recommends the use of a camera
which outputs mirror reversed images,
otherwise screen image may appear
reversed.
• Confirm the setting immediately whether the
display changes to a rear view camera image
when the shift lever is moved to REVERSE (R)
from another position.
• When the whole screen changes to a rear view
camera image during normal driving, switch to
another setting.
❒ Rear View can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is par-
tially displayed. Please beware that in this set-
ting, camera image is not resized to fit, but
that a portion of what is seen by the camera is
not viewable.
❒ Initially, this function is set to OFF.
1
Touch "CAMERA" in the SETUP menu.
2
Touch "CAMERA" to turn rear view cam-
era setting on.
Touching "CAMERA" switches between
"ON" and "OFF".
❒ Unless this setting is "ON", you cannot
switch to Rear View mode.
3
Touch "POLARITY" to select an appropri-
ate setting for polarity.
Each time you touch "POLARITY" switches
between the following polarity:
• BATTERY — When the polarity of the con-
nected lead is positive while the shift lever
is REVERSE (R) position
• GND — When the polarity of the connected
lead is negative while the shift lever is
REVERSE (R) position
Selecting the video of rear dis-
play
When the navigation screen is displayed on front,
you can select either showing the navigation
89