Advertisement
5. Pressing the "STOP" key in the initial maintenance mode returns the
unit to normal operation.
Pressing the "STOP" key when only one digit has been entered returns
the unit to the initial maintenance mode.
The unit returns to the initial maintenance mode when the number
entered does not correspond to a function listed in Table 1.
EEPROM PARAMETER INITIALlZATION
Function
Sets the EEPROM memory content, user switch data, and soft switch data
to the factory default settings.
Operation Method
1. To activate the EEPROM Parameter Initialization, enter the initial
maintenance mode. Press the "0" key one time and then press the "1"
key one time. The LCD will display "PARAMETER INIT".
2. Upon completion of the EEPROM Parameter Initialization, the unit Will
emit one long beep indicating it has returned to the initial maintenance
mode.
EEPROM WHITE LEVEL DATA INITIALIZATION
Function
The unit spans a blank white sheet of paper to establish a white level
reference point that is used for comparison of black and white levels.
Operation Method
1.
To activate the EEPROM White Level Data Initialization, enter the initial
maintenance mode. Load a blank white sheet of paper in the
document slot.
2.
Press the "0" key one time and then press the "2" key one time. The
LCD will display "WHITE LEVEL INIT".
3.
Upon completion of the EEPROM white Level Data Initialization, the unit
will emit one long beep indicating it has returned to the initial
maintenance mode.
PSB No: P-0070
Page: 2 of 8
Advertisement
