System Reset - Yamaha Tyros2 Owner's Manual

Reference
Making Global and Other Important Settings—Function
Data Backup
The backup function provides a convenient backup if the internal memory is dam-
aged. Contents of the backup include the settings of the instrument and the data
contained in the USER drive, and can be saved to a USB storage device as one file
(Tyros2.bup).
To back up the data, connect the optional USB storage device to the instrument
and press the [BACKUP] LCD button ([D] button) in the OWNER display above.
To load the backup file to the instrument (restore), connect the device that con-
tains the backup data to the instrument and press the [RESTORE] LCD button
([E] button) in the OWNER display.
CAUTION
• If protected songs are in the USER drive, move them before restoring. Otherwise,
the protected songs will be cleared when the backup data is restored.

■ System Reset ............................................................................................................................

The explanations here apply to the [FUNCTION] → UTILITY → SYSTEM RESET display.
Factory Reset (factory pro-
grammed settings)
Press this to execute the
2
Factory Reset operation for
all items checkmarked
below.
Checkmark the box of the
1
item to be reset to the fac-
tory programmed settings.
● Factory Reset—Restoring the factory programmed settings
This function lets you restore the status of the Tyros2 to the original factory settings. You can set whether or not each
of the following six items is to be restored to its original factory settings before executing the operation.
SYSTEM SETUP
MIDI SETUP
USER EFFECT
MUSIC FINDER
FILES & FOLDERS
REGIST
CUSTOM VOICE
● Custom Reset—Recalling your own custom settings
The four categories of settings below allow you to call up your own custom reset settings from files saved to the User
of Disk drive.
SYSTEM SETUP FILES
MIDI SETUP FILES
USER EFFECT FILES
MUSIC FINDER FILES
196
Tyros2 Owner's Manual
Restores the System Setup parameters to the original factory settings. You can also restore only
the System Setup settings by simultaneously holding down the highest key on the keyboard (C7)
and turning on the power. Refer to the separate Data List booklet for details about which parameters
belong to the System Setup.
Restores the MIDI settings including the MIDI templates on the User drive to the original factory
status.
Restores the User Effect settings including the user effect types, user master EQ types, user com-
pressor types, and user vocal harmony types created via the Mixing Console display to the original
factory settings.
Restores the Music Finder data (all records) to the original factory settings (page 172).
Deletes all files and folders stored in the User drive.
Temporarily deletes the current Registration Memory settings of the selected Bank. The same can
be done also by turning the [POWER] switch ON while holding the B6 key (right-most B key on the
keyboard).
Deletes all Custom Voices (page 85) on the Preset drive.
Parameters set on the various displays such as the [FUNCTION] → UTILITY and microphone set-
ting display are handled as a single System Setup file. Refer to the separate Data List booklet for
details about which parameters belong to the System Setup.
The MIDI settings including the MIDI templates on the User drive are handled as a single file.
The User Effect settings including the user effect types, user master EQ types, user compressor
types, and user vocal harmony types created via the Mixing Console displays are managed as a
single file.
All the preset and created records of the Music Finder are handled as a single file (page 172).
NOTE
• The Backup/Restore opera-
tion takes a few minutes to
complete.
• Protected data cannot be
backed up. This data
remains in the USER drive
after the attempted backup
operation.
• You cannot restore a
backup file that was created
on an instrument other than
the Tyros2.
Custom Reset (your own cus-
tom settings)
These four settings allow you to
program your own reset settings
for each of the indicated catego-
ries. Press the appropriate LCD
button to call up the Open/Save
display for the corresponding cate-
gory and select a file.