Yamaha DME Designer Owner's Manual page 120

Chapter 3 Main Panel Window
120 DME Designer Owner's Manual
• When [GPI Out] is selected:
[DME]
From the list, select the DME that will produce the GPI output.
[Ch1]/[Ch2]/[Ch3] ...
Set [ON], [OFF], or [---] for each channel. If it is set to [OFF], the [LOW HIGH] channel outputs
[HIGH LOW] signal, the [HIGH LOW] channel outputs [LOW HIGH] signal.
• When [Play Wav File] is selected:
[Scene]
Select a scene from the list.
[Wave]
Select a Wave file from the list.
Wave files set by the Wav File manager can be specified. Files can not be selected unless a Wav
Player is included in the DME configuration.