User Defined Button (User Defined Parameters) - Yamaha DME Designer Owner's Manual

Chapter 3 Main Panel Window
User Defined Button (User Defined Parameters)
User Defined Parameters
Parameters that the user can operate using function keys <F1> through <F6> in the DME unit or ICP1
are called
to any of 24 (four pages times six) presets, and operated on the DME unit or ICP1 even if DME
Designer is not being used.
This function sets parameters in DME Designer that can be called by these function keys <F1>
through <F6>.
In DME Designer, user defined parameter settings are made using the "User Defined Button" dialog
box. The user defined parameter settings are shared between zone configurations.
"User Defined Button" Dialog Box
When you click [User Defined Button] in the [Tools] menu, the "User Defined Button" dialog box is
displayed.
[1]/[2]/[3]/[4] Tabs
Switches the set to which settings will apply. You can set up to six function keys in each set. The
user defined parameters set on a single tab are displayed on one page in the DME unit main
screen.
Function Keys
The function keys are displayed in the leftmost column of the table. When you enter text for [LCD
Display], a short name with up to eight characters will be created and displayed to the right of the
function key.
98 DME Designer Owner's Manual
"User Defined Parameters." Frequently changed parameters can be assigned in advance