What Next - HP 157770-001 - DAT Drive 20/40 Tape Configuration Manual

For example, using values from the
mknod /dev/rac/c4t5d1 c 203 0x045100
To verify that the autoloader has installed correctly, run the following
mc -p /dev/rac/<device_file> -rIDSM
This will display the various elements in the autoloader.
This will display the various elements in the autoloader. For more details of the
.
man mc

What next?

Once the device files have been created, you should confirm that your new tape drive is working
properly. Chapter 8, "Verifying the installation"
sample file to test your installation.
18 HP (HP-UX) servers and workstations
output above and a LUN of 1, you would execute:
ls -al
provides instructions on backing up and restoring a
command:
mc
command, run
mc