Configuring An Autoloader; What Next - HP 157770-001 - DAT Drive 20/40 Tape Configuration Manual

Parameter
<density n>
<default
density>
<X timeout>
Values for the parameters for
Parameter
target
lun

Configuring an autoloader

No HP autoloader media moving utilities are currently supported on Solaris. Configure the drive as
described above, and then see the manual supplied with the drive for instructions on how to move
media manually.

What next?

Once the device files have been created, you should confirm that your new tape drive is working
properly. Chapter 8, "Verifying the installation"
sample file to test your installation.
36 Sun (Solaris) servers and workstations
Value Meaning
, Supported density code. The value of
0x26
, chosen by the drive—which is
0x47
or for DAT 160.
0x48
0x00
Density 0 (
0
0x26
default.
All timeouts are in seconds
are as follows:
name
Value
specifies the SCSI ID (target) of the device.
X
X
Specifies the LUN for the device.
0
0x00
for DDS-4,
0x26
for DDS-4, for DAT 72 and
0x47
Meaning
provides instructions on backing up and restoring a
means use the default density
for DAT 72 and
0x47
for DAT 160) is the
0x48
0x48