Compatible Data Cartridges - Sony SDX-800V Series User Manual

Ait drive
Hide thumbs Also See for SDX-800V Series:
Table of Contents

Advertisement

Operation
• Do not move the drives while they are operating. It may cause
malfunctions.
• Avoid exposing the drives to sudden changes from low to high
temperatures. This may cause condensation to collect inside the drives. If
the ambient temperature should suddenly rise while the drives are turned
on, turn them off and wait at least one hour before turning them back on.
If you attempt to operate the drives immediately after a sudden increase
in temperature, malfunctions may occur.
• Turning off the power to the drives while they are writing to tape may
cause the tape to become unreadable. All previously negotiated
parameters will be lost, whenever power to the drives is cycled.
Transportation
• Keep the original packing materials to facilitate safe transportation of the
drives.
• Always remove the tape/media cartridge before moving the drives. After
removing the drives from the computer, repack them into their original
packing.

Compatible Data Cartridges

The SDX-1100V series drives can be used with data cartridges marked with
the AIT-5, AIT-4, AIT-3 Ex, or AIT-3 logo.
The SDX-900V series drives can be used with data cartridges marked with the
AIT-4 or AIT-3 Ex logo.
The SDX-800V series drives can be used with data cartridges marked with the
AIT-3 Ex, AIT-3, AIT-2 Turbo, AIT-2 (read only), AIT-1 Turbo (read only),
AIT-1 (read only), or AIT-E Turbo (read only) logo.
AIT-E Turbo LOGO
AIT-2 LOGO
AIT-3 Ex LOGO
AIT-1 LOGO
AIT-2 Turbo LOGO
AIT-4 LOGO
AIT-1 Turbo LOGO
AIT-3 LOGO
AIT-5 LOGO
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdx-1100v seriesSdx-900v series

Table of Contents