Provisioning
Updating Profiles and Firmware
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Log Upgrade Success
Msg
Log Upgrade Failure Msg
License Keys
Launch a Firmware Update by using a Browser Command
An upgrade command entered into the browser address bar can be used to
upgrade firmware on a phone. The phone updates only when it is idle. The update
is attempted automatically after the call is complete.
To update the phone firmware, enter this command:
http://phone-ip-address/admin/upgrade?protocol://server-
name[:port]]/firmware-path
protocol defaults to TFTP.
•
server-name defaults to the host requesting the URL.
•
port defaults to:
•
-
69 for TFTP
-
80 for HTTP
-
443 for HTTPS
firmware-path defaults to /spa.bin (The firmware-pathname typically
•
includes the file name of the binary located in a directory on the TFTP or
HTTP server. For example, http://192.168.2.217/admin/
upgrade?tftp://192.168.2.251/spa.bin) for SPA phones, and
/wip310.img for the Cisco WIP310.)
Description
Syslog message issued after a firmware upgrade
attempt completes successfully. The default is
$PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Syslog message issued after a failed firmware
upgrade attempt. The default is
$PN $MAC -- Upgrade failed: $ERR.
This field is not used.
6
166