Customizing Standard Features
Customizing Phone Softkeys
STEP 3
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can use macro variables in XML URLs. The following macro variables are
supported:
•
User ID—UID1, UID2
•
Display name—DISPLAYNAME1, DISPLAYNAME2
•
Auth ID—AUTHID1, AUTHID2
•
Proxy—PROXY1, PROXY2
•
MAC Address—MA
•
Product Name—PN
•
Product Series Number—PSN
•
Serial Number—SERIAL_NUMBER
Click Submit All Changes.
Softkey Example
Configure the Cisco SPA525G or Cisco SPA525G2 phone with softkey that, when
pressed, dials the Sales Department extension (200). You want this button to
display on the far lower left of the IP phone screen when the phone is idle, when
the phone is off hook, or when the phone is connected on a call. You want the
outbound call (that is going to the speed dial) to originate from the second
extension on the user phone, not the primary extension.
Click Admin Login > advanced > Voice > Phone.
Under Programmable Softkey Enable, choose yes to enable.
In the Programmable Softkeys section, edit the following:
•
Programmable Softkey Enable: yes
•
PSK1: fnc=sd;ext=200@$PROXY;vid=2;nme=Sales
•
Idle Key List: Edit the field to add psk1| 1 to the beginning of the string; for
example:
psk1|1;em_login;acd_login;acd_logout;avail;unavail;
redial;dir;cfwd;dnd;lcr;pickup;gpickup;unpark;em_logout;
3
66