About Gatekeeper Requirements for H.323
Manipulating the Dial String
Note
Step 1
Step 2
Configuring Security Levels
Note
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco ATA 186 Installation and Configuration Guide
4-4
You can configure the Cisco ATA 186 to add digits to the beginning of the
outgoing dial string.
The default for dial string manipulation is off.
Follow these steps to enable dial string manipulation by using prepending:
From the web server interface, enter 4 in the Authenticate Method field.
Enter the digits to be prepended in the associated PIN field.
For example, if you enter the dial string 5551212 in line 0 and the Cisco ATA 186
is configured with 1234 in the PWD0 field, the outgoing dial string is
12345551212.
This is a Cisco Proprietary H.235 implementation; it uses the Cisco
access/clear token structure rather than the VocalTec crypto token structure.
To configure the Cisco ATA 186 to use Cisco Registration-Level Security (or
Admission-Level Security) in H.323 mode, follow these steps:
Add AutMethod to match the web interface.
Change the PIN globally to PWD.
Set USELOGINID to 1. (0 indicates LOGINID0 and LOGINID1 fields are not
used; 1 indicates LOGINID0 and LOGINID1 fields are used for H.323
registration.)
Set UID0 and UID1 to the correct E.164 IDs.
Set LOGINID0 and LOGINID1 to the H.323 Login IDs.
Chapter 4
Protocol-Specific Configurations
OL-1267-01