Connection/Setting - JVC BR-DV3000U - Professional Editing Video Cassete recorder/player Instruction Manual

PLAYBACK
This section explains the required connection, setting and operation method for using this
unit as a player.
Connection
Using this unit as a standalone device
DV IN/OUT
AUDIO VIDEO
LINE
CH 1/3 CH 2/4
VIDEO LINE OUT
AUDIO OUT
Connecting this unit to a video device with a DV terminal
It can record with almost no loss in image or sound quality.
DV
terminal
DV IN/OUT
AUDIO VIDEO
LINE
CH 1/3 CH 2/4
Player: the rear panel of the main unit
Memo
• Turn the power of both devices OFF and connect the DV cable.
• Do not insert incorrectly (in reverse) the DV cable end to DV port of both devices.
• If the recorder is a GY-DV500 or GY-DV700W, and BR-DV3000 is put to PLAY from the STOP mode, the phase of
the EE audio output from the camcorder will be displaced. There is no problem with the recorded signals.
Connecting this unit to a video device with no DV terminal (analogue signal):
Player: the rear panel of the main unit
DV IN/OUT
AUDIO VIDEO
LINE
CH 1/3 CH 2/4
VIDEO LINE OUT
AUDIO OUT
42

Connection/setting

–
Y/C
REMOTE
DC12V
NTSC/PAL
9PIN SERIAL NTSC PAL
Y/C (S) OUT
DV cable (available separately)
Y/C
REMOTE
DC12V
NTSC/PAL
9PIN
SERIAL NTSC PAL
Y/C
REMOTE
DC12V
NTSC/PAL
9PIN
SERIAL NTSC PAL
Y/C (S) OUT
Video cable
Audio cable
Y/C (S) video cable
Video cable
Audio cable
Another VTR
Another VTR
Y/C
IN
Y/C (S) video cable
–
Monitor
DV
terminal
VIDEO AUDIO
IN IN
Monitor
Monitor