Computer Setup (F10) Utility Guide
Computer Setup (Continued)
Heading
Security
(continued)
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
10
Option
Password Options
(This selection will
appear only if a
power-on password
is set.)
Device Security
Save Master Boot
Record
Restore Master Boot
Record
www.hp.com
Description
Allows you to:
• Enable/disable network server mode.
• Specify whether the password is required
for warm boot (CTRL+ALT+DEL).
✎
This selection is available only when
Network Server Mode is disabled.
See the Desktop Management Guide for more
information.
Enables/disables Serial ports A, B, C, and D,
parallel port, USB ports, system audio, and
network controllers (some models).
Saves a backup copy of the Master Boot
Record of the current bootable disk.
✎
Only appears if MBR Security is enabled.
Restores the backup Master Boot Record to the
current bootable disk.
✎
Only appears if all of the following
conditions are true:
• MBR Security is enabled.
• A backup copy of the MBR has been
previously saved.
• The current bootable disk is the same disk
from which the backup copy of the MBR
was saved.
Ä
CAUTION: Restoring a previously saved
MBR after a disk utility or the operating
system has modified the MBR may cause
the data on the disk to become
inaccessible. Only restore a previously
saved MBR if you are confident that the
current bootable disk's MBR has been
corrupted or infected with a virus.
Computer Setup (F10) Utility Guide