HP Point of Sale rp5000 Setup Manual page 19

Computer Setup (Continued)
Heading
Advanced*
(continued)
*These options should be used by advanced
users only.
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
Computer Setup (F10) Utility Guide
Option
Power-On Options
(continued)
www.hp.com
Computer Setup (F10) Utility Guide
Description
• Option ROM prompt (enable/disable).
Enabling this feature will cause the system
to display a message before loading
options ROMs. (This feature is supported
on select models only.)
• Remote wakeup boot source (remote
server/local hard drive).
• After Power Loss (off/on):
After power loss, if you connect your
computer to an electric power strip and
would like to turn on power to the
computer using the switch on the power
strip, set this option to "on."
✎
If you turn off power to your computer
using the switch on a power strip, you will
not be able to use the suspend/sleep
feature or the Remote Management
features.
• UUID (Universal Unique Identifier)
(enable/disable). Every HP computer has
a unique identifier (serial number,
date/time of manufacture, etc.). Enabling
this feature allows software (drivers,
network, etc.) to read the computer's
unique number.
• POST Delay (in seconds)
(enable/disable). Enabling this feature
will add a user specified delay to the
POST process. This delay is sometimes
needed for hard disks on some PCI cards
that spin up very slowly; so slowly that
they are not ready to boot by the time
POST is finished.
15