Ap/Bridge; Ap Mode - D-Link AMPLIFI DAP-1525 User Manual

Section 2 - Installation
Depending on how you want to use your DAP-1525 will determine which mode you use. This section will help you figure out
which setting works with your setup.
If you already have a wired or wireless router, and want to add a MediaBand (5GHz wireless), to your network, you will need
to move the switch on the back panel of the DAP-1525 to "AP 5GHz".
1. Ensure you have a broadband Internet connector such as a cable
or DSL client line that connects the
2. Internet to your home or office.
3. Connect the cable properly or install the modem.
4. Connect the cable or modem with the broadband Access Point.
5. Connect the DAP-1525's Ethernet port to your LAN.
6. Move the switch to wireless 2.4GHz AP, or 5GHz AP Mode.
7. Connect your PC or notebook to the DAP-1525 using the PC or
notebook's wireless adapter.
D-Link DAP-1525 User Manual

AP/Bridge

AP Mode

12