Time - D-Link AMPLIFI DAP-1525 User Manual

Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in. Daylight Saving can also be configured to automatically adjust the
time when needed.
Time Zone:
Select the Time Zone from the drop-down menu.
Enable
To select Daylight Saving time manually, click the
Daylight
Enable Daylight Saving check box. Next use the drop-
Saving:
down menu to select a Daylight Saving Offset and
then enter a start date and an end date for daylight
saving time.
Sync your
Click this button to set the device's time the
computer's
same to local PC.

time

settings:
Automatically
Click the check box to enable the device to
synchronize
automatically synchronize with a D-Link NTP
with D-Link's
Server. NTP stands for Network Time Protocol.
Internet time
NTP synchronizes computer clock times in a
server:
network of computers. This will only connect to a
server on the Internet, not a local server.
NTP Server
Select one of the D-Link NTP Servers from the
Used:
drop - down menu. The DAP-1525 will then
synchronize its clock to be the same time as the
D-Link Internet time server. Click the Update Now
button to synchronize with the D-Link Internet
time server immediately.
Set the Time
To manually input the time, use the drop-down menus to enter the values in these fields for the Year, Month, Day, Hour,
and Date
Minute, and Second.
Manually:
Click the Save Settings button to save any changes made.
D-Link DAP-1525 User Manual
Time
32