NEC ASPV46-AVT - AccuSync - 46" LCD TV Setup page 9

14. PIP Mode (Command 2 : n)
To select PIP mode.
You can also adjust PIP Mode in the Main/PIP menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0 : Off
2 : POP
4 : DW2
* Refer to 'Real data mapping'. See page 52.
OK Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
15. PIP Input (Command 2 : o)
To select PIP Input.
You can also adjust PIP Input in the Main/PIP menu.
Transmission
[k][o][ ][Set ID][ ][Data][Cr]
Data 0 : TV
2 : AV2
4 : S-Video
OK Acknowledgement
[o][ ][Set ID][ ][OK][Data][x]
16. PIP Position (Command 2 : p)
To select sub picture position for PIP.
You can also adjust the sub picture position using POSITION
button on the remote control or in the PIP/DW menu.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Data 0 : Right down on screen
2 : Left up on screen
OK Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
17. Volume Control (Command 2 : q)
To adjust volume.
You can also adjust volume with the volume buttons on remote con-
trol.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping'. See page 52.
OK Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
1 : PIP
3 : DW1
1 : AV1
3 : AV3
1 : Left down on screen
3 : Right up on screen
18. Balance (Command 2 : r)
To adjust sound balance.
You can also adjust balance in the SOUND menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping'. See page 52.
OK Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
19. AVL (Command 2 : s)
To control AVL On/Off of the set.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data 0 : Off
* Refer to 'Real data mapping'. See page 52.
OK Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
20. SRS (Command 2 : t)
To select SRS mode.
You can also adjust SRS in the SOUND menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 0 : Off
OK Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
21. TV Speaker (Command 2 : u)
To control TV Speaker On/Off of the set.
You can also adjust TV Speaker in the SOUND menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Off
OK Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
22. PC Auto (Command 1 : k, Command 2 : v)
To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data 0 : Execute
OK Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
9
1: On
1: On
1 : On