Performing The Initial Configuration; Using A Console Connection - Nokia IP390 - Security Appliance Installation Manual

3

Performing the Initial Configuration

The first time you turn power on to a Nokia IP390 appliance, the initial configuration process
begins. This process enables you to configure the network settings and provides access to the
admin account.
You can perform the initial configuration in two ways.
You can configure a DHCP server to provide the initial configuration information the first
time the appliance is started.
You can perform the initial configuration manually by using a console connection.
This chapter describes how to perform the initial configuration manually by using a console
connection. It includes the following sections:

Using a Console Connection

Using Nokia Network Voyager
Using the Command-Line Interface
Using Nokia Horizon Manager
For information about how to use the DHCP client for initial configuration, see the Read Me
First document.
Using a Console Connection
If you have not already done so, you need to connect to the console port to complete the initial
configuration. For information about console connections, see
Auxiliary Port"
Before you perform the initial configuration, you might gather the following information, which
can be useful during the configuration process:
What is the hostname?
What is the admin password?
Will you use Nokia Network Voyager for subsequent configuration?
Which interface will you use?
What is the assigned IP address and mask length?
What is the default router?
What is the interface speed?
IP390 Security Platform Installation Guide
on page 25.
"Connecting to the Console or
31