Figure 3.5 Hardware Installation Confirmation
5.
You just need to click "Finish" to close the Wizard at the installation complete page (Figure 3.7).
Before you start to access AAM6000EV-M via Ethernet or USB, you have to configure your PC TCP/IP
address to be 192.168.1.x, where x could be any number between 3 ~ 254, subnet mask is 255.255.255.0.
Your AAM6000EV-M default IP address is "192.168.1.1".
3.2.2
Windows® XP PCs:
1. In the Windows task bar, click the Start button, and then click Control Panel.
2. Double-click the Network Connections icon. (Figure 3.8)
3. In the LAN or High-Speed Internet window, right-click on icon corresponding to your network
interface card (NIC) and select Properties. (Often this icon is labeled Local Area Connection).
The Local Area Connection dialog box displays with a list of currently installed network
items.
4. Ensure that the check box to the left of the item labeled Internet Protocol (TCP/IP) is
checked, and click
14
Figure 3.7 Completing the Found New Hardware Wizard
(Figure 3.9)
AAM6010EV-M ADSL Combo Router User's Manual
Figure 3.6 Hardware Installation