Windows® 95, 98 Pcs; Windows® Nt 4.0 Workstations - Asus AAM6000EV User Manual

AAM6010EV-M ADSL Combo Router User's Manual
You may be prompted to install files from your Windows Me installation CD or other media. Follow
the instructions to install the files.
8. If prompted, click
9. After restarting your PC, double-click the Network and Dial-up Connections icon in the
Control Panel.
10. In Network and Dial-up Connections window, right-click the Network icon, and then select
Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click
12. In the TCP/IP Settings dialog box, click the radio button labeled Use the following IP
address and type 192.168.1.x and 255.255.255.0 in the IP address field and Subnet Mask
field, respectively.
13. Click
3.2.5 Windows® 95, 98 PCs:
1. In the Windows task bar, click the Start button, point to Settings, and then click Control
Panel.
2. Double-click the Network icon.
The Network dialog box displays with a list of currently installed network components. If the list
includes TCP/IP, the protocol has already been enabled. Please skip to step 9 directly.
3. If TCP/IP does not display as an installed component, click
Network Component Type dialog box will display.
4. Select Protocol, and then click
The Select Network Protocol dialog box displays.
5. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network
Protocols list box.
6. Click
You may be prompted to install files from your Windows 95/98 installation CD. Follow the
instructions to install the files.
7. Click
8. After restarting your PC, open the Control Panel window, and then click the Network icon.
9. Select the network component labeled TCP/IP, and then click
If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
10. In the TCP/IP Properties dialog box, click the IP Address tab.
11. Click the radio button labeled Use the following IP address and type 192.168.1.x and
255.255.255.0 in the IP address field and Subnet Mask field, respectively.
12. Click
Windows. Please click
3.2.6 Windows® NT 4.0 workstations:
1. In the Windows NT task bar, click the Start button, point to Settings, and then click Control
Panel.
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the Control Panel.
to return to the Network dialog box, and then click
to restart the PC and complete the TCP/IP installation.
twice to confirm and save your changes. You will be prompted to restart
and restart your PC again.
.
.
. Then Select
again.
.