Setup Mail Tx (For Mfc Only); Sender Subject; Size Limit - Brother NC9100H - NC 9100h Print Server Network User's Manual

Setup Mail TX (For MFC only)

This menu has three selections Sender Subject, Size Limit and
Notification.

Sender Subject

This field displays the subject that is attached to the Internet Fax data
being sent from the Brother MFC to a PC (default is " Internet Fax
Job ").
1 Menu
Press
2 1
Select to change the Sender Subject—OR—
3
Enter the subject information.
4 Set
Press .
5 Stop/Exit
Press

Size Limit

Some E-mail servers do not allow you to send large E-mail
documents. The MFC may display Out of Memory when trying to
send E-mail documents (the System Administrator will often place a
limit on the maximum E-mail size). With this function enabled, the
MFC will display Out of Memory when trying to send E-mail
documents over 1Mbyte in size. The document will not be sent and
an error report will be printed. The document you are sending should
be separated into smaller documents that will be accepted by the
mail server. (Ex. A 42 page document of the ITU-T Test Chart#1 test
chart is approximately 1Mbyte in size).
1 Menu
Press
2
Press
3 Set
Press .
4 Stop/Exit
Press
6 4 1
, , , .
.
6 4 2
, , , .
or to select On or Off .
.
FRONT PANEL SETUP MENU 10 - 15
2
to exit.