Brother Internet Print: Using Bradmin Professional Utility To Configure The Print Server - Brother NC9100H - NC 9100h Print Server Network User's Manual

Brother Internet Print: Using BRAdmin
Professional utility to Configure the Print Server
Skip this section if you wish to use the Web Browser to
configure the Print/Fax server.
Using the BRAdmin Professional utility, you can configure
the Brother print server using the TCP/IP protocol, or the IPX
protocol.
The steps required to configure the Print/Fax server to receive print
jobs from a Windows
running the BIP software are as follows.
1
Start BRAdmin Professional utility.
2
Select the node name of the desired Brother Print/Fax server
from the list and double click on it. (the default node name is
usually BRN_xxxxxx , where xxxxxx is the last six digits of the
Ethernet address (MAC address)). You will be prompted for a
password; the default password is access .
You can find the node name and MAC address by printing
out the machine configuration page. For information on how
to print the configuration page on your Print/Fax server, see
Resetting the Print/Fax Sever back to factory settings (Test
Switch) on page 13-4.
3
Click on the POP3/SMTP tab.
4
Enter the address of the POP3 server (consult your network
administrator if you do not know this address).
5
Enter the mailbox name for the remote Brother Print/Fax server.
Usually this will be the first part of the E-mail address (for
example, if the E-mail address of the print server is
emailprinter@xyz , then the mailbox name would be
emailprinter ).
6
Enter the password for the mailbox, if any.
CONFIGURING INTERNET PRINTING FOR WINDOWS
®
95/98/Me/2000/XP and Windows NT
®
4.0 PC
®
5 - 4