Basic Copy; Changing The Settings For Each Copy; Changing The Darkness; Selecting The Type Of Originals - Dell 1133 Mono Laser User Manual

Copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:

Basic copy

Changing the settings for each copy

Changing the default copy settings
Using special copy features
Deciding the form of copy output
Setting copy timeout
Basic copy
This is the normal and usual procedure for copying your originals.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Feature appears and press OK.
3. Place a single original face down on the scanner glass.
(See Loading originals).
4. If necessary, adjust the settings for each copy such as Reduce/Enlarge, Darkness, Original Type and more
(See Changing the settings for each
5. Enter the number of copies using the arrow or number keypad, if necessary.
6. Press Start ( ) on the control panel to begin copying.
To cancel the current copy job, press Stop/Clear ( ) on the control panel.
Changing the settings for each copy
Your machine provides default settings for copying so that you can quickly and easily make a copy. However, if you
want to change the options for each copy, use the copy function buttons on the control panel.
If you press Stop/Clear ( ) while setting the copy options, all of the options you have set for the current copy
job will be canceled and return to their default status after the machine completes the copy in progress.

Changing the darkness

If you have an original containing faint marking and dark images, you can adjust the brightness to make a copy
that is easier to read.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Feature appears and press OK.
3. Press the left/right arrow until Darkness appears and press OK.
4. Press the left/right arrow until the contrast mode you want appears and press OK.
Light: Works well with dark print.
Lightest: Works well with darker print.
Normal: Works well with standard typed or printed originals.
Dark: Works well with light print.
Darkest: Works well with lighter print or faint pencil markings.
5. Press Stop/Clear ( ) to return to ready mode.

Selecting the type of originals

The original type setting is used to improve the copy quality by selecting the document type for the current copy
job.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Feature appears and press OK.
3. Press the left/right arrow until Original Type appears and press OK.
copy).