Poster Copying - Dell 1133 Mono Laser User Manual

2. Place Front Side and Press [Start] appears on the display.
3. Place the front side of an original facing down on the scanner glass where arrows indicate as shown, and close
the scanner lid.
4. Press OK on the control panel.
Your machine begins scanning the front side and shows Place Back Side and Press [Start].
5. Turn the original over and place it on the scanner glass, where arrows indicate as shown then, close the
scanner lid.
6. Press OK on the control panel to begin copying.
If the original is larger than the printable area, some portions may not be printed.
If you don't press the OK button, only the front side will be copied.
If you press Stop/Clear ( ), the machine cancels the copy job and returns to ready mode.
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of paper.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Feature appears and press OK.
3. Press the left/right arrow until Layout appears and press OK.
4. Press the left/right arrow until 2-Up or 4-Up appears and press OK.
5. When Yes appears, press OK.
6. Press Start ( ) on the control panel to begin copying.
You cannot adjust the copy size using Reduce/Enlarge for the N-Up feature.

Poster copying

Your original will be divided into 9 portions. You can paste the printed pages together to make one poster-sized
document.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Feature appears and press OK.
3. Press the left/right arrow until Layout appears and press OK.
4. Press the left/right arrow until Poster Copy appears and press OK.
5. Press Stop/Clear ( ) to return to ready mode.