Brother HL-1870n Network User's Manual page 107

CHAPTER 10 BANYAN VINES NETWORK CONFIGURATION
12. When you get the Destination Attributes screen, enter the StreetTalk
name of the Brother print server and an optional description. Press F10.
13. You will get the Output strings menu. This screen allows you to define
strings of characters that can be sent before and after the print job to put
the printer in a particular state (for example, duplex mode). The default
values will work OK for most applications. However, if you are printing
text files directly from the DOS prompt, you should define a Post-job
string such as \f (formfeed) to insure that the paper is ejected (this is
generally not needed with DOS or Windows application programs, since
the program or drivers reset the printer after each job, and it may cause
problems with binary graphics files). Press F10 to accept the output
string values.
14. You will then get the Enable strings menu. This menu allows you to
select whether or not a banner page is printed, whether or not to use the
setup and reset strings, and other options. Choose the desired options or
press F10 to select the defaults.
15. You will be asked, "Would you like to add another destination at this
time?" Select No.
16. You will then get the Print Queue Status screen, which will show that
the queue is not accepting jobs or printing jobs. Change both values to
Yes and then press F10. You will get the message that the queue is now
ready to accept and print jobs. Press F10 again.
17. If you are configuring more than one queue on the file server, repeat
steps 1 through 17 of this section. Otherwise, press ESCAPE multiple
times to exit the MANAGE utility.
10-4