Brother HL-1870n Network User's Manual page 77

16. Force the print server to rescan file servers for print jobs. You may either
turn the printer off and on again or you may down the print server in
PCONSOLE as follows:
•
In the Available Options menu, highlight print server Information,
and press ENTER.
•
Select the print server name (BRN_xxxxxx_P1) and press ENTER.
If you have NetWare 4.1x, highlight Information and Status and
press ENTER, and then skip to the next bullet.
If you have NetWare 3.xx or 2.xx:
- Highlight print server Status/Control and press ENTER.
- Highlight Server Info and press ENTER.
•
Push ENTER and then select Down and press ENTER again. This
will force the print server to rescan the available file servers for new
queue entries.
•
Alternatively, use the BRCONFIG or TELNET command SET
NETWARE RESCAN to make the print server rescan for file
servers.
CHAPTER 6 NOVELL NETWARE PRINTING
6-13