To Install A Compactflash Wireless Card - HP Mp3130 - Digital Projector XGA DLP User Manual

Setting Up the Projector

To install a CompactFlash wireless card

If you install a compatible CompactFlash wireless 802.11b networking card in
the CompactFlash slot, you and other presenters can connect to the projector without
using cables. The projector supports the HP L1640A CompactFlash 802.11b
card—other cards might not be compatible. If this card is not available in your region,
contact HP Support about possible options.
■
Insert the CompactFlash wireless card into the slot with the top surface of the card
facing the front of the projector.
After installing the card, configure the card. See "To set up the projector for a wireless
connection" on page 15.
For information about compatible computers and handheld organizers, see Chapter 2,
"Presenting from a Networked Computer," on page 17 and Chapter 3, "Presenting
from a Wireless Handheld Organizer," on page 29.
For information about installing CompactFlash memory cards, see Chapter 4,
"Presenting from a Memory Card," on page 37.
12 User's Guide