Network Menu; Network Setup; Network Control; Network Status - Panasonic PT-D5000ELS Functional Instructions

NETWORK menu

Remote control
See "Navigating through the menu" on page 15.
See "Main menu and Sub-menu" on page 12.

NETWORK SETUP

Make the initial network settings before using the network
connection.
1. Select the required item to change.
2. Press the ENTER button.
3. Use F G I H to change the settings.
4. Select STORE and press the ENTER button.
The confirmation screen will be displayed. Select OK and
press the ENTER button.
Change as needed when using a
HOST NAME
DHCP server.
DHCP
Enter correct IP ADDRESS numbers.
IP ADDRESS When DHCP is ON, automatically
filled.
Enter correct SUBNET MASK
SUBNET MASK numbers. When DHCP is ON,
unnecessary to fill.
Enter correct DEFAULT GATEWAY
DEFAULT GATEWAY numbers. When DHCP is ON,
unnecessary to fill.
STORE Save the above settings.
NOTE:
• Make sure the DHCP server is ready to use.
• For details of IP ADDRESS, SUBNET MASK and DEFAULT
GATEWAY, ask the network administrator.
ON: When using DHCP server,
automatically acquire an IP
ADDRESS.
OFF: IP ADDRESS need to be
entered manually.

NETWORK CONTROL

You can switch on/off the projector network controlling method.
1. Select the required item to change.
2. Press the ENTER button.
3. Use I H to change the settings.
4. Select STORE and press the ENTER button.
The confirmation screen will be displayed. Select OK and
press the ENTER button.
For when controlling from a computer
WEB CONTROL
with the web browser.
For when controlling from a computer
PJLink CONTROL
with the PJLink
For when controlling from a computer
*1
COMMAND CONTROL
via SERIAL terminal.
Enter the command port number for
COMMAND PORT
COMMAND CONTROL.
STORE Save the above settings.
*1. If settings have been made without an administrator
password of the web browser control, add 2-byte "00"
instead of STX, and a line-feed code (0Dh) instead of
ETX.
If settings have been made with an administrator
password, of the web browser control, add a 32-byte hash
value and "00" instead of STX and a line-feed code (0Dh)
instead of ETX.
The hash value is created by MD5 combining "admin1:",
password, ":" and random numbers. The random numbers
are 8-byte values sent from the projector when
connecting.

NETWORK STATUS

You can display the current network status of the projector.
Press the ENTER button to display.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS1
DNS2
MAC ADDRESS
TM
protocol.
E
NGLISH - 37