Connecting To Power; Led Indicator - D-Link DMC-700SC - Media Converter - External User Manual

1. The ambient temperature should be between 32 and
104 degrees Fahrenheit (0 to 40 degrees Celsius).
2. The relative humidity should be less than 90 percent,
non-condensing.
3. Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 801-3,
Level 2 (3V/M) field strength.
4. Make sure that the equipment receives adequate
ventilation. Do not block the ventilation holes on each
side of the switch or the fan exhaust port on the side or
rear of the equipment.
5. The power outlet should be within 1.8 meters of the
switch.

Connecting to Power

1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a
power voltage of 7.5Vdc/1.5Amp to the DC-Jack on
the converter, and then attach the plug into a standard
AC outlet.

LED Indicator

The LED indicators give you instant feedback on status of the
converter:
LEDs
Power
(PWR)
Link and
Activity
Lights Blinking
(LINK/ACT)
State
Lights on
Lights off
Lights on
Lights off
Indication
Power on
Power off
Linking
Data transmitting and receiving
Not Linking
4