Fujitsu ScanSnap N1800 Getting Started Manual page 14

14.
Confirm the configured settings.
On the settings confirmation window of the
installation wizard, confirm the configured basic
settings, and press the [OK] button.
The wizard finishes and the login window appears.
When the scanner name or domain name has
been changed, the scanner is restarted.
If you select [No] for [Show the Installation Wizard
at next start up?], the [Installation Wizard] window
does not appear immediately after the next
scanner startup.
This concludes the scanner basic settings procedure.
The scanner basic settings can be changed by:
Changing the settings on the [Installation Wizard]
window
You can display the [Installation Wizard] window
by pressing the [Installation Wizard] button on the
[Admin Settings] window that is displayed by
pressing on the [Admin Menu] window.
Changing the settings for [System Settings] or
[Network Settings] on the [Admin Menu] window
For details about how to show the [Admin Menu]
window, refer to "Chapter 4 Checking the Network
Connection" (page 15).
14