Panasonic SC-AP01 Owner's Manual page 11

Sound adjustment
The following operations can be performed from
the "Sound" screen.
∫ The preset equalizer
"HEAVY" (heavy), "SOFT" (soft), "CLEAR" (clear),
"VOCAL" (vocal) or "FLAT" (flat/off).
≥ The factory preset is "HEAVY".
∫ Bass and Treble (BASS, TREBLE)
Adjust the level (j4 to i4).
∫ Dynamic Bass (D.BASS)
"ON" or "OFF".
≥ The factory preset is "ON".
∫ Direct-vocal surround (D.SURROUND)
"LEVEL 1", "LEVEL 2" or "OFF".
≥ The factory preset is "OFF".
∫ Muting the sound (MUTE)
The sound is temporarily muted.
∫ Adjusting the volume (VOL)
Move the volume bar to adjust the volume of this
unit.
≥ You may experience a reduction in sound quality when
these effects are used with some sources. If this occurs,
turn the sound effects off.
Other adjustment
The following operations can be performed from
the "Controller" screen.
∫ Turn this unit on or off (Í)
≥ To turn this unit on, "NET STANDBY" must be set to
"ON". ( below)
∫ Automatic standby (AUTO OFF)
This unit can be set to turn off automatically if there
is no sound output and no operation for 30 minutes.
≥ As a factory preset, this function is turned on. To
deactivate this function, select "OFF".
≥ Unless automatic standby is deactivated, this function
will work every time this unit is turned on.
≥ This setting can only be performed from the remote
control app.
∫ Network standby (NET STANDBY)
This unit can turn on automatically from standby
mode when this unit is selected as the AirPlay
speakers.
≥ As a factory preset, this function is turned off. To activate
this function, select "ON".
≥ The factory preset is "OFF". If this function is set to "ON"
the standby power consumption will increase.
≥ This setting can only be performed from the remote
control app.
11
RQT9655