Canon VB-C300 Administrator's Manual page 267

Unable to create folder. The name '<folder
name>' already exists.
Unable to change layout name. The name
'<layout name>' already exists.
Unable to change layout folder name. The
name '<folder name>' already exists.
Organize
Layouts &
This will replace an existing layout of the
Layout
same name. Are you sure?
Sequences
dialog
The layout or the folder of the same name
has already been registered.
You cannot delete
'<layout sequence name> '
because it is the current layout sequence.
The recording frame rate for sensor
'<sensor name>' must be between 0.1fps
and 30fps.
Sensor Event The pre-event time for sensor '<sensor
Settings dialog name>' must be no greater than 30.
You cannot use digital zoom when
[Custom] is selected.
Viewer
Do you want to save your Viewer Settings
Settings
changes?
window
Messages Cause
An attempt was made to create a new
folder with a name that is already being
used.
An attempt was made to change the name
of a layout or layout sequence to a name
that is already being used.
An attempt was made to change the name
of a folder to a name that is already being
used.
A layout or layout sequence with the same
name exists in the folder to which the layout
or layout sequence is moved or copied.
A folder with the same name as the folder
to which the layout or layout sequence is
moved or copied exists. Or, a layout or
layout sequence with the same name exists
in the folder to which the folder is moved or
copied.
An attempt was made to delete the current
layout sequence.
An invalid recording frame rate was
entered.
[OK] was pressed after configuring a value
exceeding 30 seconds for the pre-event
time value.
Attempted to close the [Sensor Event
Settings] dialog with VB-C60 digital zoom
specified while [Custom] was still selected.
An attempt was made to close the Viewing
Screen without saving the changes.
Messages List
9-25