Canon VB-C300 Administrator's Manual page 76

Set the [Event Notification] Tab
Tip
You can only register one e-mail address in the [To Address] field.
If you want to send the e-mail to multiple addresses, use a group address.
3. Enter the host name or IP address of the [SMTP server] in SMTP Server and port number in [Port].
Note
Enter the host name in up to 255 characters.
4. If you wan to use POP-before-SMTP for user authentication, check the [Enable authentication (POP-before-
SMTP)] option, and enter the user name used for authentication in [User Name] and password in
[Password]. Also, enter the host name or IP address of the POP server in [POP Server] and port number in
[Port].
Note
Enter the user name in up to 100 characters.
Enter the password in up to 20 characters.
Enter the host name in up to 255 characters.
Tip
If this function is enabled, the Storage Server will attempt to perform a POP login before sending e-mail that
may be required for some SMTP servers.
Example event notification e-mail
An event of priority 3 occurred on 12/05/2006 at 15:15:17 +1000.
Parking Lot 1: Sensor on
3-24