Sony EVI-D70P Operating Instructions Manual page 41

3
Attach the ceiling bracket (B) to the
junction box on the ceiling.
Align the holes in the bracket with those
in the junction box, and use appropriate
screws (not supplied).
There are elongated holes for the screws
along the rounded edges of the ceiling
bracket (B). Later, the front of the
camera will be positioned along this
edge. Face the camera to the front, adjust
the aim, and attach it securely.
Ceiling
Front of the camera
Ceiling
bracket (B)
4
Attach the ceiling bracket (A) to the
bottom of the camera using the 3
×
screws ( 3 M 3
Align the screw holes on the bottom of
the camera with those in the ceiling
bracket, and attach the bracket to the
camera.
Attach the retaining
wire at the same time.
3
M
×
3 6
(supplied) 3
1
Tighten the screws a bit at a time in the
numbered order shown in the illustration.
Attach the retaining wire using the screw
designated as number 3 above. After all of
the screws are inserted and temporarily
tightened properly, securely tighten each
one in turn.
Note
For assembly, use only the screws supplied
with the unit. Using other screws may
damage the unit.
6) supplied.
Ceiling
2
Ceiling
bracket (A)
41
Preparations
GB