Command Reference
Command Reference
This section documents new or modified commands. All other commands used with this feature are
documented in the Cisco IOS Release 12.0 command reference publications.
•
atm scramble-enable
•
atm voice aesa
•
serial restart-delay
•
session target
•
show atm video-voice address
In Cisco IOS Release 12.0(1)T or later, you can search and filter the output for show and more
commands. This functionality is useful when you need to sort through large amounts of output, or if
you want to exclude output that you do not need to see.
To use this functionality, enter a show or more command followed by the "pipe" character (|), one
of the keywords begin, include, or exclude, and an expression that you want to search or filter on:
Following is an example of the show atm vc command in which you want the command output to
begin with the first line where the expression "PeakRate" appears:
For more information on the search and filter functionality, refer to the Cisco IOS Release 12.0(1)T
feature module titled CLI String Search.
22
Cisco IOS Release 12.0(7)T
command | {begin | include | exclude} regular-expression
show atm vc | begin PeakRate