2.1
Removing the chassis cover
The AR200 chassis is a 2U form factor designed for easy assembly and
disassembly, making the installation of internal components very
convenient. At the top of the chassis is a rotating lock that secures the
cover to the chassis.
Unlocking the Cover
To unlock the cover, turn the rotating lock clockwise until the triangle mark
points to OPEN.
Rotating Lock
Removing the cover
Slide the top cover toward the front for about an inch, then lift it from the
chassis.
The top cover of the chassis has locking tabs at the rear end that
connect to the inner side of the back panel. Make sure to disengage
the locking tabs before lifting up the cover.
2-2
Triangle Mark
OPEN
CLOSE
Chapter 2: Hardware setup