Table of Contents
Advertisement
2.6
DA3100 connectors
Inside the DA3100 RAID controller are connectors that connect to other
system components using interface and power cables. Refer to the
illustration below for the specific cable connections.
All the cables are already connected when you receive the system.
You do not need to disconnect the cables when installing drives or
creating a RAID configuration.
ASUS AR200 RAID system
SCSI Channel 2
(to SCSI host channel 2
on the rear panel)
SCSI Channel 3
(to SCSI In connector
on the left backplane)
Power connector
(connect 4-pin power plug
from system interface board)
2
I
C connector
(to SMBus connector on
system interface board)
SCSI Channel 0
(to SCSI In connector
on the right backplane)
SCSI Channel 1
(to SCSI host channel 1
on the rear panel)
RS-232 connector
(to COM1 port on the
rear panel)
Power connector
(connect P4 plug from
power supply)
2-7
Advertisement
Table of Contents
